Part Number Hot Search : 
APTGT1 PL60S 2SA1603Q MM3Z75 IDTQS3 S7142LSF HT82V HA16142P
Product Description
Full Text Search
 

To Download MP2-PS030-51S1-TR30 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? metpak ? 2-fb inverse header 2 mm 5-row, stacking, solder or press-fit tail mp2 series physical electrical environmental metpak is a trademark of 3m company. futurebus+ is a registered trademark of the institute of electrical and electronic engineers, inc. (ieee). insulation material: high temp lcp flammability: ul 94v-0 color: beige contact material: copper alloy plating underplating: 50 " (1.27 m) nickel wiping area: see ordering information solder tails: see ordering information current rating: signal: 1.5 a - all contacts simultaneously insulation resistance: 10 3 m withstanding voltage: 1000 v ac temperature: -55 c to +125 c process temperature rating: 260c (profile per j-std-020c) moisture sensitivity level: 1 (per j-std-020c) ts-1123-05 sheet 1 of 4 date modified: april 6, 2007 ? 16 mm to 18.5 mm high-profile stacking ? pin counts up to 300 ? footprint compatible with standard futurebus+ ? ? ideal for hot swapping applications ? end-to-end stackable ? mates with mp2-r series for parallel stacking applications ? see regulatory informa tion appendix (ria) for chemical comp liance information ul file no: e68080
3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? metpak ? 2-fb inverse header 2 mm 5-row, stacking, solder or press-fit tail mp2 series. ts-1123-05 sheet 2 of 4 mp2 - psxxx - 51x1 - xxxxx ordering information ps = header, inversed stacking pin count (see table 1) rows 5 = 5 rows contact loading (see table 2) tail length (see table 2) termination style s = solder tail p = press-fit plating options: (see table 3) note: 1. refer to iec 61076-4-104 futurebus+? global standard. 2. "press fit" describes a contact tail having a compliant section designed to make a reliable electrical connection with a plated through-hole (pth) in a printed circuit board, typically a "back plane.? 3. for special stack heights, tail lengt hs or pin arrangements contact 3m. "a" 2.00 .079 typ. row position x position 2 position 1 c d e a b 1.50 .059 17.80 .701 2.00 .079 4x 7.00 .276 3.86 .152 13.90 .547 3.75 .148 "c" mate length 8.00 .315 "e" "d" .20 tail length mated with mp2-rxxx-5xxx-xxxx "b" 2.00 .079 typ. 00.00.00 mm 3 0.3 0.13 mm [inch] tolerance unless noted [ ] dimensions for reference only
3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? metpak ? 2-fb inverse header 2 mm 5-row, stacking, solder or press-fit tail mp2 ts-1123-05 sheet 3 of 4 plating suffix press-fit tails* solder tails plating composition 0.25 m [10 "] min. au contact area 2.54 m [100 "] min. snpb tail area 1.27 m [50 "] min. ni all over 0.76 m [30 "] min. au contact area 2.54 m [100 "] min. snpb tail area 1.27 m [50 "] min. ni all over 0.08 m [3 "] min. au contact area 0.67 m [27 "] min. pdni contact area 2.54 m [100 "] min. snpb tail area 1.27 m [50 "] min. ni all over 0.13 m [5 "] min. hard au contact area, lubricated 1.02 m [40 "] min. pdni contact area 0.10 m [4 "] min. pd contact area 2.54 m [100 "] min. snpb tail area 1.27 m [50 "] min. ni all over 0.25 m [10 "] min. au contact area 5.08 m [200 "] min. matt whisker mitigating sn tail area 1.27 m [50 "] min. ni all over 0.76 m [30 "] min. au contact area 5.08 m [200 "] min. matt whisker mitigating sn tail area 1.27 m [50 "] min. ni all over 1.27 m [50 "] min. au contact area, lubricated 5.08 m [200 "] min. matt whisker mitigating sn tail area 1.27 m [50 "] min. ni all over 0.08 m [3 "] min. au contact area 0.67 m [27 "] min. pdni contact area 5.08 m [200 "] min. matt whisker mitigating sn tail area 1.27 m [50 "] min. ni all over 0.13 m [5 "] min. hard au contact area, lubricated 1.02 m [40 "] min. pdni contact area 0.10 m [4 "] min. pd contact area 5.08 m [200 "] min. matt whisker mitigating sn tail area 1.27 m [50 "] min. ni all over *compliant-pin tail (ria e3 & c2 apply) (ria e3 & c2 apply) table 3 - plating tg tg30 (ria e2 & c2 apply) (ria e2 & c2 apply) tr40b fj (ria e2 & c2 apply) (ria e3 & c2 apply) (ria e2 & c2 apply) (ria e3 & c2 apply) (ria e1 & c1 apply) (ria e1 & c1 apply) tr30 kr (ria e1 & c1 apply) (ria e1 & c1 apply) rf (ria e1 & c1 apply) (ria e1 & c1 apply) lr (ria e1 & c1 apply) (ria e1 & c1 apply) pd (ria e1 & c1 apply) (ria e1 & c1 apply) solder press-fit* 1 4.65 [0.183] 4.15 [0.163] 10.25 [0.404] 1 5.00 [0.197] 3.95 [0.156] 10.25 [0.404] *compliant-pin tail table 2 contact-to-pc board tail termination option no. dim. "c" dim. "d" dim. "e" pin count rows 030 11.95 [0.471] 10.00 [0.394] 5 060 23.95 [0.943] 22.00 [0.866] 5 090 35.95 [1.415] 34.00 [1.339] 5 120 47.95 [1.889] 46.00 [1.811] 5 150 59.95 [2.36] 58.00 [2.283] 5 180 71.95 [2.833] 70.00 [2.756] 5 210 83.95 [3.305] 82.00 [3.228] 5 240 95.95 [3.778] 94.00 [3.701] 5 270 107.95 [4.251] 106.00 [4.173] 5 300 119.95 [4.722] 118.00 [4.646] 5 table 1 - connector & row lengths dim. "a" mm [inch] dim "b" mm [inch]
3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? metpak ? 2-fb inverse header 2 mm 5-row, stacking, sold er or press-fit tail mp2 ts-1123-05 sheet 4 of 4 2.00 .079 4x "b" recommended pcb hole mounting pattern a1 2.00 .079 typ. 8.00 .315 "d" plated thru hole lo 0.10 hole finished dia. mm [in] cu thickness mm [in] snpb thickness microns ["] drilled hole dia. mm [in] "d" 0.65-0.80 [.0256-.0315] 0.025 [.001] min 15 [600] max 0.81-0.86 [.0319-.0339] table 4 -- hole plating for tg, tg30, tr30, tr40b finishes only hole finished dia. mm [in] cu thickness mm [in] immersion matte sn thickness microns ["] electrolitic au thickness microns ["] osp entek thickness microns ["] drilled hole dia. mm [in] 0.700-0.800 0.025-0.045 0.5 - 2.5 0.1 - 0.5 0.2 - 0.5 0.830-0.860 [.0330-.0340] or [.0276-.0315] [0.001-0.002] [20 - 100] [4 - 20] [8 - 20] 0.85mm [ #66] twist drill table 5 -- hole plating for fj, kr, rf, lr, and pd finishes only "d"
regulatory information appendix 3m electronic solutions division/interconnect europe appendix e1: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product is rohs compliant 2005/95/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e2: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/747/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e3: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment as amended by commission decision 2005/618/ec. this product contains lead in the solder tail area in excess of the maximum concentration value allowed. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e4: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains decabde in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/17/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. ria-2217-a
china appendix c1: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix c2: china rohs 2 0 electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. the numerical reference in the symbol above should not be construed as a representation regarding the products life or an extension of a product warranty. the product warranty is stated below. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the product warranty stated below. important notice all statements, technical information, and recommendations related to 3ms products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. before using this product, you must evaluate it and determine if it is suitable for your intended application. you assume all risks and liability associated with such use. any statements related to the product which are not contained in 3ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3m. warranty; limited remedy; limited liability. this product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3m makes no other warranties including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. if this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3ms option, to replace or repair the 3m product or refund the purchase price of the 3m product. except where prohibited by law, 3m will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3m product, regardless of the legal theory asserted. name and content of hazardous substances or elements 3 electronic solutions division 6801 river place blvd. austin, tx 78726-9000 800/225-5373 www.3m.com/interconnects ria-2217-a ? 3m 2007


▲Up To Search▲   

 
Price & Availability of MP2-PS030-51S1-TR30

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X